Vertical Platform Lifts
Have a question for Lift-U® that is not listed here or do you need more information? Contact Us Today!
No, See our new Accessor III APL Model. The Accessor III has been installed in an auditorium, churches, synagogues, and other worship centers. In addition, Lift-U® can customize the lift to fit almost any application.
The Accessor I and the Accessor II lifts are limited to 2 feet of vertical travel. The Accessor III is limited to 48 inches of travel.
In architectural applications the maximum slope for a ramp is 1:12. For every 1 inch of vertical rise you must have 12 inches of horizontal ramp. A 36-inch vertical rise will require at least 41 feet of ramp because a 5-foot long horizontal rest is required for every 30 feet of travel. The vertical platform lift will take much less floor space and, in many applications, can be incorporated into the architectural features of the building.
No, the Accessor I Courtroom Wheelchair Lift and the Accessor III Performance Lift do not require a pit. Both products are perfect for renovation projects as well as new construction. The Accessor II does require a 6-inch pit or a raised floor and it is the preferred model when a raised floor and or a pit is available.
Accessor III is limited to a maximum rated load capacity of 750 lbs. In courtroom lift applications an Accessor I or an Accessor II with a platform size greater than 15 sq. ft. shall have a rated load capacity of 750 lbs. An Accessor I or Accessor II with a platform size greater than 18 sq. ft. shall have a rated load capacity of 1050 lbs per ASME A18.1 2008 or later.
Yes. The 2010 ADA Standards for Accessible Design require that vertical platform lifts are independently operable from the landings and inside the platform. All Lift-U® products are designed and configured for independent operation. Lift-U® vertical platform lifts can be operated by an attendant from any of the control panel locations if the user prefers that the lift be operated by others.
The Accessor I, the Accessor II, and Accessor III require a 110 VAC, single phase, 20 Amp, 3 wire dedicated circuit.
The 2010 ADA Standards for Accessible Design references ASME A18.1 Safety Standard for Platform Lifts and Stairway Chairlifts. Lift-U®’s products comply with the latest published version of the A18.1 Standard. Lift-U®’s products also comply with other applicable standards such as the International Building Code (IBC) and American National Standards Institute (ANSI). Since states adopt the new versions of the national codes at their own pace, a variance is sometimes needed to inspect the lift to the language of the newest version of the code. Lift-U® provides assistance and any required documentation to the dealer/installer for the purpose of obtaining the necessary permits and variances for the installation.
Lift-U® sells direct as the manufacturer from Escalon, CA through a “Furnish Only” contract agreement through our authorized dealer or a locally licensed elevator/wheelchair lift contractor.
Lift-U® products are installed by our authorized dealers or by a locally licensed elevator/lift contractor. This permits each installation to have local, trained licensed mechanics to provide on-site service if needed. Contact Lift-U® today to see who is the authorized dealer in your area.
Whenever possible Lift-U® products have been designed to be multipurpose. In Courtroom applications the lifts are designed into the courtroom decorum and used for ambulatory access unless needed for wheelchair access. Many of our courtroom lifts are installed to access more than one level.